Can builders still use ladders? What HSE's guidance says
By Dave Groom·AI-assisted·Editorial policy
Yes. Ladders aren't banned, but HSE says they suit low-risk, short-duration work once a risk assessment shows safer equipment isn't justified. As a guide, if you'd be up a leaning ladder or stepladder for more than 30 minutes at a time, use something else. Set leaning ladders at 1 in 4 and keep three points of contact.

The rules sit under the Work at Height Regulations 2005. Here's what HSE's guidance asks of a builder.
What do the Work at Height Regulations require?
HSE says employers, and anyone who controls work at height, must make sure it's properly planned, supervised and carried out by competent people with the right equipment. Low-risk, straightforward tasks need less planning.
HSE's step-by-step approach is to avoid work at height where you can, then prevent falls, then minimise the distance and consequences of any fall. Collective protection, such as guardrails or a tower, comes before personal protection.
When is a ladder the right choice?
When the risk assessment shows that equipment giving better fall protection isn't justified, because the task is low risk and short, or because of workplace features you can't change.
HSE says short duration alone doesn't decide it. And whoever uses the ladder must be competent, or be supervised by someone who is.
How do you set up a leaning ladder?
HSE's guidance for leaning ladders includes:
- use the 1-in-4 rule: one unit out for every four up, about 75 degrees
- don't work off the top three rungs
- keep your belt buckle within the stiles, and don't overreach
- grip the ladder and face the rungs when climbing or coming down
- keep three points of contact when climbing and, where you can, at the work position
- don't stand a ladder on pallets, bricks, tower scaffolds, vans or other movable objects
- don't work within 6 m horizontally of an overhead power line unless it's dead or insulated
For electrical work, use a non-conductive ladder, such as fibreglass or timber.
Where should a ladder stand?
On firm, level, clean ground. HSE says use proper levelling devices, not packing with bricks, blocks or timber. Keep it where vehicles, doors and windows won't hit it, and keep the public away with barriers or cones.
How do you secure a ladder?
HSE sets an order. Tie the ladder, with both stiles tied. If you can't, use an effective ladder stability device. If not, wedge it, for example against a wall. Footing the ladder is the last resort.
What about ladders used for access?
A ladder used to reach another level should be tied and extend at least 1 metre above the landing point, so there's a handhold. HSE recommends a self-closing gate at the top. Don't use a stepladder to reach another level unless it's designed for that.
What checks does a ladder need?
Two kinds:
- A pre-use check by the user at the start of the working day, and again if something changes, such as the ladder being dropped. These don't need recording.
- Detailed visual inspections by a competent person at fixed intervals, set by the employer and recorded.
Ladders that are part of a scaffold system are inspected every seven days with the scaffold. If a check finds damage to the stiles, feet, rungs or locks, don't use it.
How do you get this across to the team?
Cover ladder use in the method statement for the task and in a toolbox talk before the work starts. Our RAMS guide shows how to plan the work at height in your risk assessment.
Sources and further reading